# \[How-to Article\] Installing Windows 10 IoT Enterprise Version 1.3.0 on Arm-based SBC “RSB-3720” to Experience X86 Windows-alike

**URL:** <https://forum.aim-linux.advantech.com/t/how-to-article-installing-windows-10-iot-enterprise-version-1-3-0-on-arm-based-sbc-rsb-3720-to-experience-x86-windows-alike/411>\
**Category:** Windows on Arm\
**Tags:** imx8mplus, windows-10-iot-arm, arm\
**Created:** [March 17, 2023, 8:09am UTC](https://forum.aim-linux.advantech.com/t/how-to-article-installing-windows-10-iot-enterprise-version-1-3-0-on-arm-based-sbc-rsb-3720-to-experience-x86-windows-alike/411 "2023-03-17T08:09:01Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![phill.liu](https://avatars.discourse-cdn.com/v4/letter/p/a8b319/32.png) [@phill.liu](https://forum.aim-linux.advantech.com/u/phill.liu)\
**Post date:** [March 17, 2023, 8:09am UTC](https://forum.aim-linux.advantech.com/t/how-to-article-installing-windows-10-iot-enterprise-version-1-3-0-on-arm-based-sbc-rsb-3720-to-experience-x86-windows-alike/411/1 "2023-03-17T08:09:01Z")

</div>

**1. Introduction**

Advantech has updated its board support packages (BSP) to version 1.3.0, based on i.MX Windows 10 IoT released by NXP. These updates have been installed on the RSB-3720, featuring i.MX 8M Plus series processor platforms to support Windows 10 IoT Enterprise Version 1.3.0.

This how-to article describes the process of building and installing Windows 10 IoT BSP Version 1.3.0 on the Advantech RSB-3720. The highly optimized Windows 10 IoT BSP simplifies the setup installation with only one SD card, making it as easy as installing Windows OS on X86.

Additionally, Version 1.3.0 includes all the necessary code, documents, and tools to help users build and run Windows 10 IoT on the i.MX 8M Plus from scratch. Check our release notes for a full review of the capabilities of Windows 10 on Arm of the i.MX 8M Plus processor.

**2. Prerequisites**

Necessary Hardware:

- The Advantech RSB-3720 — a 2.5” Pico-ITX SBC with NXP i.MX8M Plus SOC **(Quad Core / 6GB RAM)**
- 1 x 8GB Micro SD card for flashing the OS installer
- 1 x micro USB cable for flashing the boot loader
- 1 x power adapter (input: 100 ~ 240V AC 50/60Hz; output: DC 12V 3A; Advantech P/N: 96PSA-A36W12R1-3)

**Necessary Software:**

- **Win32 Disk Imager**  
Please follow the link below to download an executable file.

- **Windows 10 IoT Enterprise Image package**

**3. Install Windows 10 IoT Enterprise on RSB-3720**

- **3-1. Extract the zip file (file name: 20230207.zip) of the image package you downloaded.**

- **3-2. Extract the zip file (RSB3720A1AIM20WIV0004.7z) in the folder and flash the firmware into eMMC**  

- **3-3. Prepare one 8GB SD card for flashing OS installer in your host PC whether it is Linux or Windows operating system.**

- **3-4. Flash firmware image into the same Micro SD card**

- **3-5. Flash Windows IoT to eMMC**

**4. Conclusion**  
Version 1.3.0 significantly reduces the installation process, taking only about 30 minutes. So, grab a cup of coffee while you wait. More native functions are now enabled, such as dual LANs and native HDMI. You can experience its out-of-the-box capabilities and meet your development needs.