RSB-3810 How to create image and load in subsequent machines

Technical Supports Software
1

I have setup one RSB-3810 with my custom services and all other required softwares. Now how will I create the image and use the image in other RSB-3810 machines. I tried to create a raw image using dd command and tried to load the image using genio tool but it is not working. Could any one help how I can resolve this. OS is Ubuntu 22.04.

Also need to know I can boot from SD card in RSB-3810

2

IMG_8457
IMG_84571920×2560 1.14 MB
I tried to restore with recovery package and in genio tool it saying finishied. But device is not booting.

1 Like
3

Hi,

The RSB-3810 is based on the MediaTek Genio 1200 (MT8395) platform, which does not support booting directly from an SD card.

You can refer to the MediaTek official FAQ for more details:

Regarding your previous post about image cloning, please note that the Ubuntu Recovery Package is not a complete eMMC image, so re-flashing it may not fully recover the system if other boot-related partitions have been affected.

For further assistance with the image cloning issue, please contact your local Advantech representative so we can better understand your requirements and coordinate with our technical team.

Best Regards,
Jems